Product introduction:
80mm High-speed dual-channel thermal printer mechanism, printing speed is 250mm/sec, with automatic paper cutter,widely used in POS terminals, automatic ticket vending machines, receipt label printing, self-service bank terminals, instruments, Medical equipment, game machines, lottery machines, queuing machines, ATM machines and other fields.It provides two paper feeding methods, curved channel and straight channel, which is more convenient for users to use.
Product Features:
■ Paper Width: 82.5mm Max.
■ Printing Speed: 250mm/sec
■ Open structure design, easy installation and maintenance
■ Easily handle thick printing paper and receipt printing paper with the thickness of 180μm (7.1mils)
■ Low noise, high-speed printing in 250mm/sec
■ Two paper feeding channels, straight and curved channels
■ Drag the large paper roll, the diameter can reach 150mm, and the paper roll can reach 254mm when used with the paper feeding holder
■ Cutter has a long service life, support full cut or partial cut
■ Two paper feeding modes: manual paper loading and automatic suction paper feeding
■ Three paper outgoing methods: full cut, partialcut, manual tear-off
■ Support black label paper and roll paper
■ Two sensors are installed in the paper path, the detections black mark and paper feeding are more accurate
■ Product compiled ROHS standard
Printing Parameters | Printing Method | direct thermal |
dot per line | 640dot | |
Resolution | 203DPI | |
max. printing speed | 250mm/sec | |
effective printing width | 80mm | |
paper width | 58,70,76,80,82.5mm | |
feeding distance | 0.125mm | |
paper path | bending / straight feeds | |
Detections | Print Head Sensor (Temp.) | detected by thermistor |
roller position | Detected by mechanical switch | |
paper end detections | Detected by photoelectric sensor | |
black mark detections | Detected by photoelectric sensor | |
Cutter reset | Detected by mechanical switch | |
Operating Voltage | Logic voltage | 5V |
Thermal printing head printing voltage | 24V | |
Peak current | printer head | 5.01A(26.4V/128dot) |
motor | 0.50A | |
cutter | 1.20A | |
Auto-Cutter | method | Sliding type |
paper thickness | 0.054 ~ 0.120mm | |
cutting method | full cut or partial cut (leave the center point) | |
Working period | 0.4s/cut | |
Cutting length | 10mm | |
cutter frequency | 60cuts/min | |
Reliabilities | Pulse excitation | 100 million or more |
TPH (Reliabilities) | 150km or more | |
cutter | 1.5 million cuts | |
Operation Condition (RH) | Temperature: 5 ~ 45℃, Humidity:10 ~ 80% | |
Storage Condition (RH) | Temperature: -10 ~ 50℃ ,Humidity:10 ~ 90% | |
Dimensions | 100.1×86.5×57mm | |
Weight | Approxi 583g | |
* The above parameters are subject to change without notice. |